Download Booklet PDF

INTRODUCTION

This Construction Details booklet contains typical details of framing members, sheeting, trim, and accessories common to most Dean buildings. Using this booklet in conjunction with the blueprints and shipping list prepared for a specific building will permit an experienced steel erector to erect any building in a timely manner that is both structurally sound and pleasing to look at.

The booklet is divided into three (3) parts as follows:

1. Structural Framing Details

2. Sheeting and Flashing Details

3. Accessory Details

Additionally, each part is subdivided into many parts that show construction details for the various types of buildings fabricated by Dean Steel Buildings, Inc. Please note that many details presented in this booklet may not be relevant to the building type you are erecting. The first thing that you must do is identify from the purchase order what building type you are attempting to erect, as well as what sheeting profile is being furnished with the building. Once you have established that information, follow the details relating to accessories actually listed on the purchase order.

The “Standard Construction Details Details” is a supplement to the erection drawings for the job. Refer to this booklet when detail cannot be found on the erection drawings.

TABLE OF CONTENTS

 

STRUCTURAL FRAMING DETAILS

 SHEETING & FLASHING ACCESSORIES & MISC.

Title

 pg

Title

 pg

Title

 pg
Insert Girt Isometric 1 Sheeting Details – Rib-12 18 Doors – Personnel 36
Single Slope Framing Isometric 2 Sheeting Details – Rib-6 18a Overhead Door Details 37
Wing Unit Framing Isometric 3 Sheeting Details – Shadow Panels 19 Framed Opening Details – Misc. 38
Insert Girt Building Roof Framing 4 Roof Trim & Liner Panel Details 20 Skylight/Wall Light Details 39
Insert Sidewall Girt to Insert Endwall Girt BF – EW 5 Interior Partition Details 21 Skylight FL Product Approval 40
Insert Sidewall Girt to Insert Endwall Girt RF – EW 6 Valley Gutter Details 22 Monovent Details 41
Bypass Girt Isometric 7 Gutter & Rake Flashing Details 23 Vents – Circular 42
Bypass Girt Building Roof Framing 8 Downspout Spacing 24 Lo-Profile Ridge Vents 43
E-Z Lap Purlin/Girt Lap Detail 8 Gutter Miter Template 25 Slide Door Isometric 44
Bypass Sidewall Girt to Insert Endwall Girt BF – EW 9 Rake Miter Template 26 Slide Door Framing Details 45
Bypass Sidewall Girt to Bypass Endwall Girt BF – EW 10 Rake Slide Retainer Angle 27 Slide Door Leaf Details 46
Bypass Sidewall Girt to Insert Endwall Girt RF – EW 11 Canopy Framing – Straight Beam 28 Hangar Door Cross section 47
Bypass Sidewall Girt to Bypass Endwall Girt RF – EW 12 Roof Extension Framing 29 Window Details – 2070 Fixed 48
Insert Girt Wind Column Details 13 Canopy/Roof Extension Sheeting & Flashing – Straight Beam 30 Window Details – Horizontal Slide 49
Bypass Girt Wind Bent Details 14 Canopy – Tapered Beam 31 Louver Details – Fixed 50
Bypass Girt Wind Column Details 15 Fascia – Vertical 32 Exhaust Fan – Vertical Mount 51
Cable Bracing Details 16 Fascia Cross Section – Vertical 33 Masonry Details 52
Turn-of-Nut Method 17 Fascia – Sloped 34 Masonry Details 53
Fascia Cross Section – Sloped 35 Screw Identification Detail 54
Purlin/Girt Strap 55
Glossary of Std Part Numbers 56
NPD Prefixes 57
NPD Part Numbering 58
Index 59