DEAN Steel Buildings, inc. provides a wide range of flashing for any purpose you may have. In the case that the following table does not meet the flashing criteria you need, please do not hesitate to contact your Estimator or Salesperson and ask about our CUSTOM FLASHING ( a sketch will have to be provided).
Please refer to the following when asked for slope Code:
|
* Miter or Slope Code |
||||
| A | 0:12 | J | 4:12 | |
| B | 0.5:12 | K | 4.5:12 | |
| C | 1:12 | L | 5:12 | |
| D | 1.5:12 | M | 5.5:12 | |
| E | 2:12 | N | 6:12 | |
| F | 2.5:12 | X | SPECIAL | |
| Part No. | Size Length |
Description | Weight | |
 Peak Finial |
FNN6C010500 | Pitch = 1:12 (GLM/COL) | 1.7 | |
| FNN6J010500 | Pitch = 4:12 (GLM/COL) | 1.7 | ||
| FNO6C010500 | Pitch = 1:12 (GLM/COL) | 1.7 | ||
| FNO6J010500 | Pitch = 4:12 (GLM/COL) | 1.7 | ||
 Parapet Inside Corner Box |
FL4397 | (GLM/COL) | 1.5 | |
 Sculptured Rake End |
FL4398 | Right handed (GLM/COL) |
1.5 | |
| FL4399 | Left handed (GLM/COL) |
1.5 | ||
 Sculptured Gutter |
GU120BA4 | 24 ga. | 20’7″ Basic | 47.0 |
| GU120EX4 | 24 ga. | 20’7″ Extension | 45.0 | |
| GU120BA6 | 26 ga. | 20’7″ Basic | 36.0 | |
| GU120EX6 | 26 ga. | 20’7″ Extension | 34.0 | |
|
Assembly includes brackets and rivets. Basic assembly also includes two gutter ends and gutter seal. Third digit is roof pitch, last digit is gauge. |
||||
| GUA4-200700 | 24 ga. | 20’7″ Gutter only | 40.0 | |
| GUA6-200700 | 24 ga. | 30.0 | ||
 4″x5″ Downspout |
DSA6-040100 | 26 ga. | DSA = StraightDSB = With elbowStraps and mounting hardware to be added separately. | 5.9 |
| DSB6-040100 | 26 ga. | 5.9 | ||
| DSA6-060100 | 26 ga. | 8.8 | ||
| DSB6-060100 | 26 ga. | 8.8 | ||
| DSA6-100200 | 26 ga. | 14.7 | ||
| DSB6-100200 | 26 ga. | 14.7 | ||
| DSA6-120100 | 26 ga. | 17.6 | ||
| DSB6-120100 | 26 ga. | 17.6 | ||
 4″x5″ downspout Elbow |
FL4110 | 26 ga. | 45° elbow | 1.3 |
| FL4104 | 26 ga. | 95° elbow | 1.3 | |
| FL4105 | 26 ga. | 95° elbow | 1.3 | |
| FL4107 | 26 ga. | 90° elbow | 1.3 | |
 8″ offset for 4″x5″ Downspout |
FL4108 | 26 ga. | 8″ offset | 2.7 |
 Scupper 4″x5″ |
FL4109 | 26 ga. | Scupper | 0.25 |
| FL4106 | 26 ga. | Downspout strap 1″x18″ | 0.11 | |
 Standard Gutter Bracket |
HW5635 – 1:12 HW5636 – 4:12 | Top | Gutter bracket comes in two pieces. Must be field assembled. Order fastener separately. | 0.6 |
| HW9201 | Bottom | |||
 Proseam Gutter Bracket |
HW5647 – 1:12 HW5648 – 4:12 | Top | Gutter bracket comes in two pieces. Must be field assembled. Order fastener separately. | 0.6 |
| HW9201 | Bottom | |||
 Valley Gutter (Eave to Eave) 14 ga. |
VGR4C100000 | 1:12 to 1:12 Valley Gutter GNZ |
87.5 | |
| VGR4J100000 | 4:12 to 4:12 Valley Gutter GNZ |
87.5 | ||
|
Please refer to Slope code at the beginning of this page (5th digit) |
||||
| AN1255 | 14 ga. | Splice band – GNZ | 2.2 | |
| AN1256 | 14 ga. | End Cap – GNZ | 2.3 | |
 Valley Gutter (wall to Eave) 14 ga. |
VGW4C100000 | Wall to 1:12 valley gutter GNZ |
101.0 | |
|
Please refer to Slope code at the beginning of this page (5th digit) |
||||
| AN1251 | 14 ga. | Splice band – GNZ | 3.0 | |
| AN1252 | 14 ga. | End Cap – GNZ | 2.5 | |
 Parapet Gutter |
GUP6-100200 | 26 ga. | Parapet gutter – (GLM/COL) | 22.4 |
| GUP4-100200 | 24 ga. | Parapet gutter – (GLM/COL) | 30.2 | |
|
Please refer to Slope code at the beginning of this page (5th digit) |
||||
 Inside Corner Flashing (RS) |
ISC6-040100 | 26 ga. | (GLM/COL) | 5.0 |
| ISC6-060100 | 26 ga. | (GLM/COL) | 7.4 | |
| ISC6-100200 | 26 ga. | (GLM/COL) | 12.3 | |
 Inside Corner Flashing (RT) |
ICT6-040100 | 26 ga. | (GLM/COL) | 3.9 |
| ICT6-060100 | 26 ga. | (GLM/COL) | 5.9 | |
| ICT6-100200 | 26 ga. | (GLM/COL) | 9.8 | |
 Inside Corner Flashing opt. 3″ |
ICO6-040100 | 26 ga. | (GLM/COL) | 2.0 |
| ICO6-060100 | 26 ga. | (GLM/COL) | 3.0 | |
| ICO6-100200 | 26 ga. | (GLM/COL) | 5.0 | |
 Inside Corner Flashing Univ. 6″ |
ICU6-040100 | 26 ga. | (GLM/COL) | 4.0 |
| ICU6-060100 | 26 ga. | (GLM/COL) | 5.9 | |
| ICU6-100200 | 26 ga. | (GLM/COL) | 9.7 | |
 Outside Corner Flashing (RS) |
OCS6-040100 | 26 ga. | (GLM/COL) | 3.0 |
| OCS6-060100 | 26 ga. | (GLM/COL) | 4.5 | |
| OCS6-100200 | 26 ga. | (GLM/COL) | 7.4 | |
| OCS6-120100 | 26 ga. | (GLM/COL) | 7.8 | |
 Outside Corner Flashing (RT) |
OCT6-040100 | 26 ga. | (GLM/COL) | 4.9 |
| OCT6-060100 | 26 ga. | (GLM/COL) | 7.3 | |
| OCT6-100200 | 26 ga. | (GLM/COL) | 12.2 | |
| OCT6-120100 | 26 ga. | (GLM/COL) | 14.5 | |
 Outside Corner Flashing Univ. 6″ |
OCU6-040100 | 26 ga. | (GLM/COL) | 3.2 |
| OCU6-060100 | 26 ga. | (GLM/COL) | 4.9 | |
| OCU6-100200 | 26 ga. | (GLM/COL) | 8.3 | |
 Standard Eave Flashing |
FEA6C100200 | 26 ga. | (GLM/COL) | 4.7 |
| FEA6J100200 | 26 ga. | (GLM/COL) | 4.7 | |
 High Side Sculptured Eave Flashing |
FEH6C100200 | 26 ga. | (GLM/COL) | 14.7 |
| FEH4C100200 | 24 ga. | (GLM/COL) | 20.0 | |
 Low Side Sculptured Eave Flashing |
FEL6C100200 | 26 ga. | (GLM/COL) | 14.7 |
 Proseam Eave Flashing |
FEP6C100200 | 26 ga. | (GLM/COL) | 4.9 |
 Reverse slope Eave Flashing |
FER6C100200 | 26 ga. | (GLM/COL) | 7.4 |
 Eave flashing Optional |
FEO6C100200 | 26 ga. | (GLM/COL)Please refer to Slope code at the beginning of this page (5th digit) | 4.9 |
 Vertical Fascia Cap Flashing |
FAO6-040100 | 26 ga. | (GLM/COL) | 4.9 |
| FAO6-060100 | 7.3 | |||
| FAO6-100200 | 12.2 | |||
| FAV6-040100 | 4.9 | |||
| FAV6-060100 | 7.3 | |||
| FAV6-100200 | 12.2 | |||
 Sloped Fascia cap flashing |
FAX6-040100 | 26 ga. | (GLM/COL) | 4.9 |
| FAX6-060100 | 7.3 | |||
| FAX6-120100 | 12.2 | |||
 Sloped Fascia Base |
FBS6-040100 | 26 ga. | (GLM/COL) | 3.0 |
| FBS6-060100 | 4.4 | |||
| FBS6-100200 | 7.4 | |||
 Vertical Fascia Base Flashing |
FBV6-040100 | 26 ga. | (GLM/COL) | 3.0 |
| FBV6-060100 | 4.4 | |||
| FBV6-100200 | 7.4 | |||
 Fascia End Flashing |
FAE6-040100 | 26 ga. | (GLM/COL) | 3.0 |
| FAE6-060100 | 4.4 | |||
| FAE6-100200 | 7.4 | |||
 Jamb Flashing (RS) |
FJS6-070200 | 26 ga. | (GLM/COL) | 2.6 |
| FJS6-080200 | 3.0 | |||
| FJS6-100200 | 3.7 | |||
 Jamb Flashing (RT) |
FJT6-070200 | 26 ga. | (GLM/COL) | 2.6 |
| FJT6-080200 | 3.0 | |||
| FJT6-100200 | 3.7 | |||
 Header Flashing (RS) |
FHS6-030410 | 26 ga. | (GLM/COL) | 1.2 |
| FHS6-040410 | 1.6 | |||
| FHS6-060410 | 2.3 | |||
| FHS6-080200 | 3.0 | |||
| FHS6-100200 | 3.7 | |||
 Header Flashing (RT) |
FHT6-030410 | 26 ga. | (GLM/COL) | 1.2 |
| FHT6-040410 | 1.6 | |||
| FHT6-060410 | 2.3 | |||
| FHT6-080200 | 3.0 | |||
| FHT6-100200 | 3.7 | |||
 Shadow Panel Hem Flashing |
FHE6-100200 | 26 ga. | (GLM/COL) | 2.5 |
 Jamb or Header Cap Flashing |
FJC6-040100 | 26 ga. | (GLM/COL) | 3.9 |
| FJC6-060100 | 5.9 | |||
| FJC6-100200 | 9.8 | |||
 Panel Cap Flashing (RS) |
FCS6-100200 | 26 ga. | (GLM/COL) | 2.5 |
 Panel Cap Flashing (RT) |
FCT6-100200 | 26 ga. | (GLM/COL) | 2.5 |
 Window Header Flashing (RT) |
FWH6-100200 | 26 ga. | (GLM/COL) | 4.9 |
 Window Sill Flashing – Univ. |
FWS6-100200 | 26 ga. | (GLM/COL) | 3.7 |
 Partition Flashing |
FPF6-060100 | 26 ga. | (GLM/COL)Between girt and purlins at partition. | 5.9 |
| FPF6-100200 | 9.8 | |||
 Transition Flashing (RT – RS) |
FTT6-100200 | 26 ga. | (GLM/COL) | 12.3 |
| FTS6-100200 | 12.1 | |||
 Rake Flashing (RT – RS) |
FRA6-200700 | 26 ga. | (GLM/COL) | 29.7 |
| FRA4-200700 | 24 ga. | 36.8 | ||
 Rake Flashing – Proseam |
FRP6-100200 | 26 ga. | (GLM/COL) | 14.8 |
| FRP4-100200 | 24 ga. | 19.9 | ||
 Rake Slide |
FRS6-100200 | 26 ga. | (GLM/COL) | 3.7 |
|
|
FRR6-100200 | 26 ga. | (GLM/COL)Please refer to Slope code at the beginning of this page (5th digit) | 9.8 |
|
|
FWR6-100200 | 26 ga. | (GLM/COL) | 9.8 |
 Wing Unit Roof Flashing |
FWU6-100200 | 26 ga. | (GLM/COL)Please refer to Slope code at the beginning of this page (5th digit) | 7.4 |
 Gravel Stop for Flat Roofs |
FL4033 | 26 ga. | (GLM/COL) | 7.3 |
 Masonry Eave Flashing |
FEM6-100200 | 26 ga. | (GLM/COL)Please refer to Slope code at the beginning of this page (5th digit) | 12.2 |
 Masonry Rake Flashing |
FRM6-100200 | 26 ga. | (GLM/COL) | 4.9 |
 Skylight Trim – Univ |
FSK6-110100 | 26 ga. | (GLM/COL) | 2.7 |
 Canopy Soffit Flashing |
FSS6-100200 | 26 ga. | (GLM/COL)Please refer to Slope code at the beginning of this page (5th digit) | 2.5 |
| FST6-100200 | 2.5 | |||
 Canopy Eave Flashing |
FCE6-040100 | 26 ga. | (GLM/COL) | 3.0 |
| FCE6-060100 | 4.4 | |||
| FCE6-100200 | 7.4 | |||
 Roof Extension Rake Flashing |
FRE6-100200 | 26 ga. | (GLM/COL) | 3.7 |
 Roof Extension Soffit Flashing |
FRF6-100200 | 26 ga. | (GLM/COL) | 3.7 |
 Slide Door Hood Flashing |
FSH6-100200 | 26 ga. | (GLM/COL) | 14.7 |
 Slide Door Bypass Flashing |
FSB6-100200 | 26 ga. | (GLM/COL) | 3.7 |
